Versions Compared

Old Version 7

changes.mady.by.user Brad Hess

Saved on

compared with

New Version Current

changes.mady.by.user John Dubelko

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

General Guidelines

  • Do no use 2-3 flute endmills on steel
  • Do no use ZRN or Other Aluminum coated endmills on steel.  AKA if it is coated do not use.  Gold is ZRN coated
  • Do not use aggressive feeds and speeds.  Keep it low and slow until you are 100% sure
  • Do not take super light passes and grind away.  This is bad for the endmill
  • Most of the tools pre-loaded are for aluminum or plastic do not use them for steel.  Over time we will add steel tools to the mix.  For now please work with the Tormach manager


Tool Library Link (Always double check the tools as they can change on occasion)

https://a360.co/2KlZJry

 Tools Loading into Holders


Tool NumberDescriptionSupplierModel NumberLink for PurchaseCostTool TypeStick OutFeeds and Speeds Details Notes
T1  2in Tormach

 

Tool Library Link (Always double check the tools as they can change on occasion)

https://a360.co/2KlZJry

 Tools Loading into Holders

Tool NumberDescriptionSupplierModel NumberLink for PurchaseCostTool TypeStick OutFeeds and Speeds Details NotesT1  2in Tormach  https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=38258&portrelay=1 Fly Cutter 

Aluminum 30 ipm/2500 fpm

Steel do not use this tool on steel as it will break the insert

Set for 2in width of cut appoximatlyT2  .98430 Tormach 

 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=
31258
38258&portrelay=1

155.00

Inserts are $22.00 per set and only available in 10 packs

25mm Center Indexing on Long shaft   T3  3/8 Thread Mill Tomach 34696

 Fly Cutter

Aluminum 30 ipm/2500 fpm

Steel do not use this tool on steel as it will break the insert

Set for 2in width of cut appoximatly
T2  .98430 Tormach
 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=31258&portrelay=
34696
1
81

155.

95 Threadmill   Used for 3/8, 7/16, 1/2, M10, M12, M14 threads

00

Inserts are $22.00 per set and only available in 10 packs

25mm Center Indexing on Long shaft

 Part number 31258
T3 
T4 
 3/8
Ball Endmill
Thread Mill
 
 Tomach
      
 34696 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3469681.95 Threadmill

 Used for 3/8, 7/16, 1/2, M10, M12, M14 threads
T4  3/8 Ball Endmill







T5 3/8 90 Degree Spot Drill 
 








T6 
      T6 #7 Drill        
#7 Drill 







T7 1/4 90 Degree Spot Drill 
       








T8 1/2 90 Degree Center Drill 
  
     








T9 17/64 Drill 
       








T10 1/
T10 1/
8 Flat Endmill 
       








T11 1/8 Ball Endmill 
       








T12 

1/4 Flat Endmill
  
      








T13 7/64 Drill 







T14 
      T14 3/8 Flat       
3/8 Flat Long







T15 3/8 Flat
Long        








T16  #43 Drill
       T18








T17 1/8 Spot Drill 
       








T18

3/16 Ball Endmill
       








T19 

3/16 Flat Endmill
       








T20Jacobs Chuck







T21.1405 Drill







T221/2 Flat Endmill







T231/2 Ball Endmill







T24#7 Drill







T25#17 Drill







T2613/32 Drill







T271/4 Drill







T281/8 Drill







T29#45 Drill







T30#30 Drill







T31#40 Drill







T32#37 Drill







T33#47 Drill







T341/8 Slot Mill







T353/32 Slot mill







T361/16 Flat







T37








T38








T39








T40








T41








T42








T43








T44








T45








T46








T47








T48








T49








T50Haimer Probe







T52Tapping Head


















Tool Holder Images

L to RImage
  • Slot Saw
  • Empty
  • Slot Saw
  • Key Cutter
  • T52 Tapping Head - Need to set offset and thread in offsets before usage
  • T50 Haimer Probe

Image Modified

  • T6 #7 Drill
  • T5 3/8 90 Degree Spot Drill
  • T4 3/8 Ball Endmil
  • T3 Thread Mill
  • T2 25 mm Center Cut Endmill
  • T1 Superfly

Image Modified

  • T12 1/4 Flat Endmill
  • T11 1/8 Ball Endmill
  • T10 1/8 Flat Endmill
  • T9 17/64 Drill
  • T8 1/2 60 degree Center Drill
  • T7 1/4 90 Degree Spot Drill

Image Modified

  • T18 3/16 Ball
  • T17 1/8 90 Degree spot drill
  • T16 #43 Drill
  • T15 3/8 Flat
  • T14 3/8 Flat Long
  • T13 7/64 Drill

Image Modified

  • T24 #7 Drill
  • T23 1/2 Ball Long
  • T22 1/2 Flat Long
  • T21 .1405 Drill
  • T20 Jacobs Chuck (Dynamic based upon drill used)
  • T19 3/16 Flat

Image Modified

  • T30 #30 Drill
  • T29 #45 Drill
  • T28 1/8 Drill
  • T27 1/4 Drill
  • T26 13/32 Drill
  • T25 #17 Drill

Image Modified

  • T33 #47 Drill
  • T32 #37 Drill
  • T31 #40 Drill

Image Modified

1
  • T36 1/16 Flat

2.

3. Small
  •  Small Jacobs Chuck

Image Modified



Spares/Inventory


Tool NumberSizeQuantitySupplierModel NumberLink for PurchaseCostTool Type
Notes17/64 Drill10Tormach33583https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33583263.00 per 10Drill1/4 Drill10Tormach33582https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33582230.00 per 10Drill13/32 Drill5Tormach33602https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3360238.00 Per 5Drill#7 Drill10Tormach34507https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34507153.00 Per 10Drill1/8 Drill10Tormach33574https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33574131.00 Per 10Drill#43 Drill10Tormach34543https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454398.00 Per 10Drill

#16 Drill

10Tormach34516https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34516142.00 Per 10Drill#17 Drill10Tormach34517https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34517142.00 Per 10Drill#45 Drill10Tormach34545https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454598 Per 10Drill#46 Drill10Tormach34546https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454698 Per 10Drill#40 Drill10Tormach34540https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454098 Per 10Drill#37 Drill10Tormach34537https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453798 Per 10Drill#31 Drill10Tormach34531https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453198 Per 10Drill#30 Drill10Tormach34530https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453098 Per 10Drill#29 Drill10Tormach34529https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3452998 Per 10Drill1/16 2 flute Flat1Kodiak

5463480

B007BTQK9i

https://www.kodiakcuttingtools.com/viewproducts/carbide-end-mills-2-flute-single-end-ticn-coated&parttohighlight=54634808.90Endmillhttps://www.kodiakcuttingtools.com/CarbideEndMillSpeedsAndFeeds1/8 4 Flute HSS1YG107039

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07039

https://apexindustrialsupply.com/yg1-usa-edp-07039-4-flute-regular-length-center-cut-hss-1-8-x-3-8-x-3-8-x-2-5-16/

8.37http://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA
Notes

17/64 Drill10Tormach33583https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33583263.00 per 10Drill

1/4 Drill10Tormach33582https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33582230.00 per 10Drill

13/32 Drill5Tormach33602https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3360238.00 Per 5Drill

#7 Drill10Tormach34507https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34507153.00 Per 10Drill

1/8 Drill10Tormach33574https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33574131.00 Per 10Drill

#43 Drill10Tormach34543https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454398.00 Per 10Drill

#16 Drill

10Tormach34516https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34516142.00 Per 10Drill

#17 Drill10Tormach34517https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34517142.00 Per 10Drill

#45 Drill10Tormach34545https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454598 Per 10Drill

#46 Drill10Tormach34546https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454698 Per 10Drill

#40 Drill10Tormach34540https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3454098 Per 10Drill

#37 Drill10Tormach34537https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453798 Per 10Drill

#31 Drill10Tormach34531https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453198 Per 10Drill

#30 Drill10Tormach34530https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3453098 Per 10Drill

#29 Drill10Tormach34529https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=3452998 Per 10Drill










1/16 2 flute Flat1Kodiak

5463480

B007BTQK9i

https://www.kodiakcuttingtools.com/viewproducts/carbide-end-mills-2-flute-single-end-ticn-coated&parttohighlight=54634808.90Endmillhttps://www.kodiakcuttingtools.com/CarbideEndMillSpeedsAndFeeds

1/8 4 Flute HSS1YG107039

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07039

https://apexindustrialsupply.com/yg1-usa-edp-07039-4-flute-regular-length-center-cut-hss-1-8-x-3-8-x-3-8-x-2-5-16/

8.37Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA

5/16 4 Flute HSS1YG107051

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07051

https://apexindustrialsupply.com/yg1-usa-edp-07051-4-flute-regular-length-center-cut-hss-5-16-x-3-8-x-3-4-x-2-1-2/

8.37Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA

3/16 4 flute HSS1YG107043

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07043

https://apexindustrialsupply.com/yg1-usa-edp-07043-4-flute-regular-length-center-cut-hss-3-16-x-3-8-x-1-2-x-2-3-8/

8.37Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA

5/16 2 flute HSS1YG101051https://apexindustrialsupply.com/yg1-usa-edp-01051-2-flute-regular-length-se-hss-5-16-x-3-8-x-9-16-x-2-5-16/7.57Endmill

1/4 2 flute HSS1YG101047https://apexindustrialsupply.com/yg1-usa-edp-01047-2-flute-regular-length-se-hss-1-4-x-3-8-x-1-2-x-2-5-16/7.57Endmill

1/8 2 Flute Carbide (TICN)3

Tormach

YG1

33439

https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33439

Same part

http://www.yg1usa.com/feature/itemdetail.asp?edpno=21601TC

Same Part Cheaper

https://apexindustrialsupply.com/yg1-usa-edp-21601tc-2-flute-regular-length-42-deg-helix-straight-shank-ticn-coated-carbide-for-aluminum-banshee-1-8-x-1-4-x-5-16-x-1-3-4/


25.25


19.75

Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA

3/16 2 flute TIAIN Coated2

Tormach

YG1

33741

https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33741


12.05Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA

1/16 2 Flute TICN1

Tormach

YG1

33434

21554TC

https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33434

http://www.yg1usa.com/feature/itemdetail.asp?edpno=21554TC

https://apexindustrialsupply.com/yg1-usa-edp-21566tc-2-flute-regular-length-42-deg-helix-straight-shank-ticn-coated-carbide-for-aluminum-banshee-3-16-x-1-4-x-7-16-x-2/

25.25Endmillhttp://www.yg1usa.com/feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA

1/2 2 flute ZRN Coating Extended Length1Lakeshore350012LXRFhttp://www.lakeshorecarbide.com/12extendedlengthrougherfinisher2flutevariablefluteendmillforaluminumzrn.aspx80.94Endmillhttp://www.lakeshorecarbide.com/lakeshorevariablespeedandfeedforaluminum.aspx

3/8 3 flute ZRN Extended Length1Lakeshore360038X-XLhttps://www.lakeshorecarbide.com/38xtralonglengthvariablefluteendmillforaluminumzrn.aspx71.99Endmillhttp://www.lakeshorecarbide.com/pdf/VFA.pdf

3/8 2 Flute ZRN Coated2Lakeshore320038XRFhttp://www.lakeshorecarbide.com/38rougherfinishersquareendvariable2fluteendmillforaluminumzrn.aspx41.50Endmillhttp://www.lakeshorecarbide.com/pdf/VFA.pdf

1/4 3 flute ZRN Coated2Lakeshore330014XRFhttp://www.lakeshorecarbide.com/14rougherfinishersquareendvariable3fluteendmillforaluminumzrn.aspx28.55Endmillhttp://www.lakeshorecarbide.com/pdf/VFA.pdf

3/16 2 Flute Ball ZRN Coated1Lakeshore340316XRFhttp://www.lakeshorecarbide.com/316rougherfinishervariablefluteballendmillforaluminumzrn.aspx30.27Endmillhttp://www.lakeshorecarbide.com/pdf/VFA.pdf

1/8 2 flute ball ZRN Coated1Lakeshore340018XRFhttp://www.lakeshorecarbide.com/18rougherfinishervariablefluteballendmillforaluminumzrn.aspx24.29Endmillhttp://www.lakeshorecarbide.com/pdf/VFA.pdf

1/8 2 Flute Flat ZRN Coated5Lakeshore350018XRFhttps://www.lakeshorecarbide.com/18rougherfinishervariable2fluteendmillforaluminumzrn.aspx16.47Endmill

1/16 2flute Flat3LakeshoreLC204-001020https://www.lakeshorecarbide.com/116dia2flutereglengthendmilluncoated.aspx5.94Endmill

1/16 2 flute Ball TIALN1LakeshoreLC219-001023http://www.lakeshorecarbide.com/116stubcarbideballendmill2flutetialncoated.aspx9.95Endmill

1/8 2 flute1OnsrudAMC400002https://www.onsrud.com/Products/AMC400002.asp18.95Endmill

3/16 2 flute1OnsrudAMC400008https://www.onsrud.com/Products/AMC400008.asp25.95Endmill

1/4 2 flute medium length2OnsrudAMC700752https://www.onsrud.com/Products/AMC700752.asp34.45Endmill

1/4 2 flute Standard length2OnsrudAMC700102https://www.onsrud.com/Products/AMC700102.asp30.90Endmill

3/8 2 flute medium length1OnsurdAMC700852https://www.onsrud.com/Products/AMC700852.asp49.35Endmill

1/2 2 flute1OnsrudAMC700952https://www.onsrud.com/Products/AMC700952.asp72.45Endmill

#29 Cabide Jobber Drill1Ultratools51129https://www.ultra-tool.com/products/13.30Endmill

1/4 90 Degree Spot Drill1Ultratools52516https://www.ultra-tool.com/products/16.20Endmill

21/32 4 flute HSS Endmill1NiagaraMC40213Old Product
Endmill

41/64 4 flute HSS Endmill1NiagaraMC40209

Endmill

3/8 HSS 4 flute1NiagaraEDP N52264

Endmill

1/2 HSS 4 flute1NiagaraEDP N52268

Endmill

3/8 4 flute long1NiagaraEDP N63342

Endmill

1/4 4 flute HSS1Shars404-9395https://www.shars.com/1-4-x-3-8-m-42-cobalt-4-flute-double-end-mill-18.00Endmill

1/16 woodruff Keyseat Cutter1Whitney302040

https://www.whitneytool.com/PDF/WhitneyCatalog.pdf


https://www.whitneytool.com/Product.aspx?ID=8544


Endmill

#37 Reamer1Morse5661

https://www.morsecuttingtools.com/catalogue/product/1213060

https://www.motionindustries.com/productDetail.jsp?sku=06923027

34.42Endmill

3" x 3/32" X 30T Slot Mill1Tormach34988https://
5/16 4 Flute HSS1YG107051

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07051

https://apexindustrialsupply.com/yg1-usa-edp-07051-4-flute-regular-length-center-cut-hss-5-16-x-3-8-x-3-4-x-2-1-2/

8.37http://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA3/16 4 flute HSS1YG107043

http://www.yg1usa.com/feature/itemdetail.asp?edpno=07043

https://apexindustrialsupply.com/yg1-usa-edp-07043-4-flute-regular-length-center-cut-hss-3-16-x-3-8-x-1-2-x-2-3-8/

8.37http://www.yg1usa.com/feature/speed_data.asp?img=brown_mill/141&name=TECHNICAL%20DATA1/8 2 Flute Carbide (TICN)3

Tormach

YG1

33439

https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=33439

Same part

http://www.yg1usa.com/feature/itemdetail.asp?edpno=21601TC

Same Part Cheaper

https://apexindustrialsupply.com/yg1-usa-edp-21601tc-2-flute-regular-length-42-deg-helix-straight-shank-ticn-coated-carbide-for-aluminum-banshee-1-8-x-1-4-x-5-16-x-1-3-4/

25.25

19.75

http://www.yg1usa.com/feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA3/16 2 flute TIAIN Coated2

Tormach

YG1

33741https://www.
tormach.com/store/index.php?app=ecom
&ns=prodshow&ref=3374112.05http://www.yg1usa.com/feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA1/16 2 Flute TICN
&ns=prodshow&ref=3498896.00Endmill

3" X 1/8 X 30T Slot1Tormach

YG1

33434

21554TC
34989https://
www.
tormach.com/store/index.php?app=ecom&ns=prodshow&ref=
33434http
34989113.00Endmill










1/4 20 4 flute long plug1Granger008862AShttps://www.
yg1usa.com/feature/itemdetail.asp?edpno=21554TC

https://apexindustrialsupply.com/yg1-usa-edp-21566tc-2-flute-regular-length-42-deg-helix-straight-shank-ticn-coated-carbide-for-aluminum-banshee-3-16-x-1-4-x-7-16-x-2/

grainger.com/product/REGAL-1-4-20-39TA7729.35

Imperial

Tap



2-56 Plug2OSG2492800http://www.osgtool.com/Product-Detail/HYPRO-DC-Taps/249280025.80Imperial Tap

2-56 Bottom2OSG2492900
25.25
http://www.
yg1usa
osgtool.com/
feature/speed_data.asp?img=blue_mill/116&name=SPEED%20and%20FEED%20DATA
Product-Detail/HYPRO-DC-Taps/249290025.80Imperial Tap

0/80 Tap2Widia/Granger13202

https

1/2 2 flute ZRN Coating Extended Length1Lakeshore350012LXRFhttp

://www.

lakeshorecarbide

widia.com

/12extendedlengthrougherfinisher2flutevariablefluteendmillforaluminumzrn.aspx

/en/products/44931668/557905/25758765/26261949/100007411.html?orderNumber=2750249

https://www.grainger.com/product/WIDIA-GTD-0-80-4CPH9

15.40Imperial Tap

12-32 Tap1Unknown
80.94

http://www.
lakeshorecarbide
northbaycuttingtools.com/
lakeshorevariablespeedandfeedforaluminum.aspx3/8 3 flute ZRN Extended Length1Lakeshore360038X-XLhttps://www.lakeshorecarbide.com/38xtralonglengthvariablefluteendmillforaluminumzrn.aspx71.99
12-32-gh3-high-speed-steel-4-flute-bottom-tap-121212328.99Imperial Tap

8-32 Tap2

Greenfeild Tap & Die

Tormach

34567https
http
://www.
lakeshorecarbide
tormach.com/
pdf
store/
VFA.pdf3/8 2 Flute ZRN Coated2Lakeshore320038XRFhttp://www.lakeshorecarbide.com/38rougherfinishersquareendvariable2fluteendmillforaluminumzrn.aspx
index.php?app=ecom&ns=prodshow&ref=34567&portrelay=17.65Imperial Tap

6-32 Tap3OSG2401603
41.50
http://www.
lakeshorecarbide
osgtool.com
/pdf/VFA.pdf1/4 3 flute ZRN Coated2Lakeshore330014XRFhttp://www.lakeshorecarbide.com/14rougherfinishersquareendvariable3fluteendmillforaluminumzrn.aspx
/Product-Detail/HYPRO-DC-Taps/240160314.12Imperial Tap

10-32 Tap1

YG1

Tormach

I9343
28.55

http://www.

lakeshorecarbide

yg1usa.com/

pdf

feature/

VFA.pdf3/16 2 Flute Ball ZRN Coated1Lakeshore340316XRF

itemdetail.asp?edpno=I9343

https

http

://www.

lakeshorecarbide

tormach.com/store/

316rougherfinishervariablefluteballendmillforaluminumzrn.aspx30.27http://www.lakeshorecarbide.com/pdf/VFA.pdf

index.php?app=ecom&ns=prodshow&ref=34569&portrelay=1

7.65Imperial Tap

1/4-20 Tap1

YG1

Tormach

I9403https
1/8 2 flute ball ZRN Coated1Lakeshore340018XRFhttp
://www.
lakeshorecarbide.com/18rougherfinishervariablefluteballendmillforaluminumzrn.aspx24.29http://www.lakeshorecarbide.com/pdf/VFA.pdf1/8 2 flute1Onsrud
tormach.com/store/index.php?app=ecom&ns=prodshow&ref=34570&portrelay=17.65Imperial Tap










M2.5 X 0.453Greenfeild328174
AMC400002
https://www.
onsrud
amazon.com/
Products/AMC400002.asp18.95
Greenfield-Threading-328174-M2-5-Bottom/dp/B0196606KC9.04Metric Tap

M2.5 X 0.452Helicoil2087-2.5
3/16 2 flute1OnsrudAMC400008
https://www.
onsrud
motionindustries.com/
Products/AMC400008.asp25.951/4 2 flute medium length2Onsrud
productDetail.jsp?sku=0154997929.91Metric Tap

M2.5 X 0.451Helicoil2093-2.5
AMC700752
https://www.
onsrud
motionindustries.com/
Products/AMC700752.asp34.45
productDetail.jsp?sku=0154999632.60Metric Tap

M31KodiakKTC210846
1/4 2 flute Standard length2OnsrudAMC700102
https://www.
onsrud.com/Products/AMC700102.asp30.90
amazon.com/Kodiak-Cutting-Tools-KCT210846-Threads/dp/B007BTQ9IU?ref_=fsclp_pl_dp_413.29Metric Tap

M12 X 1.52National
3/8 2 flute medium length1OnsurdAMC700852

https://www.
onsrud
amazon.com
/Products/AMC700852.asp49.35
/CHANNELLOCK-8343-12mm-1-5-Metric/dp/B0002JT0Z08.81Metric Tap

M15.2 X 1.41 Pipe Tap1




Really unique Tap

M18.6 X 1.41 Pip Tap1




Really unique Tap
1/2 2 flute1OnsrudAMC700952https://www.onsrud.com/Products/AMC700952.asp72.45











Tools used for the Turners Cube Class

Tool NumberSizeSupplierModel NumberLink for PurchaseTool TypeStick OutFeeds and Speeds DetailsNotes
 T1 Superfly 2 in Tormach
 

 https://www.tormach.com/store/index.php?app=ecom&ns=prodshow&ref=38258&portrelay=1
  


Aluminum 30 ipm/2500 fpm

Steel do not use this tool on steel as it will break the insert

Set for 2in width of cut appoximatly
 3/8 Rougher3/8 Lakeshore 320038XRFhttp://www.lakeshorecarbide.com/38rougherfinishersquareendvariable2fluteendmillforaluminumzrn.aspx
  


http://www.lakeshorecarbide.com/pdf/VFA.pdf
 

1/41/4Lakeshore330014XRFhttps://www.lakeshorecarbide.com/14rougherfinishersquareendvariable3fluteendmillforaluminumzrn.aspx
 
 


http://www.lakeshorecarbide.com/pdf/VFA.pdf